Floor care equipment in Joliette
(450) 752-2617
‹ HomeRide-on auto-scrubber

Johnny Vac · Auto-scrubbers

Ride-on auto-scrubber

Reference JVC70RIDERN

A ride-on model for large open areas. Check doorway clearance against the full machine and squeegee width.

Reference
JVC70RIDERN
Brand
Johnny Vac
Category
Auto-scrubbers
Model information
71 cm / 28 in
Interactive photo1.0×
Johnny Vac · Ride-on auto-scrubber

Product photograph. Zoom in for a closer look.

The product in detail

The JVC70RIDERN is a ride-on scrubber for large compatible hard-floor areas. Twin brush motors and separate suction accompany 90 L solution and 100 L recovery tanks. Its visual-button dashboard and tilting tank support control access and inspection of some components.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Ride-on auto-scrubber · Listed specifications
SpecificationListed value or configuration
Drive voltage24 V
Brush motor400W x 2
Vacuum motor550 W
Solution tank24 gal (90 L)
Recovery tank27 gal (100 L)
Working width28 in (70 cm)
Squeegee width38 po (96 cm)
Listed output4550 m2/h (48 975.79 pi2/h)
Net weight598.33 lb (271.4 kg)
Dimensions31.49 in x 47.63 in x 44.48 in (80 cm x 121 cm x 113 cm)
Average runtime3h.
Charging time6h.

Surfaces and compatibility

For hard floors that permit machine scrubbing and water recovery. Identify the covering, finish, joints and level changes before choosing a brush or pad.

Confirm battery runtime and actual dimensions before ordering. Allow clearance for the squeegee, which is wider than the scrubbing path; inch conversions are rounded.

Preparation and use

  1. Remove large loose debris and clear the route. Mark the work area.
  2. Inspect brushes, squeegee blades, filters, tanks and power supply.
  3. Fit approved consumables and dose a cleaner compatible with floor and machine.
  4. Test suitable settings. Monitor scrubbing and water recovery, particularly when turning.
  5. Empty the recovery tank before it overfills and inspect results after drying.

Care and storage

Rinse tanks and filters as instructed. Clear debris from blades and brushes and check wear. For battery models, follow the specified charger, ventilation and charging cycle. Inspect and store cords on mains models.

Limits and things to check

Cleaning width is not always overall width: measure the squeegee, turns and doorways too. Actual output includes filling, emptying, obstacles and travel. Water streaks call first for checking blades, hose and tank.

Equipment, accessories and options

Supplier-listed equipment: battery and charger as included. Request the actual battery configuration, brushes, squeegee and consumables supplied.

Practical questions

How do I check this reference suits my floor?

Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.

Are all accessories and consumables included?

Supplier-listed equipment: battery and charger as included. Request the actual battery configuration, brushes, squeegee and consumables supplied.

What information is still needed before purchasing?

Validate footprint, turning clearance, permitted working slope, battery and variant runtime on your site.

Why might results differ from the listed output?

Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.