Floor care equipment in Joliette
(450) 752-2617
‹ HomeTraction-drive auto-scrubber

Johnny Vac · Auto-scrubbers

Traction-drive auto-scrubber

Reference JVC56BTN

A walk-behind model with traction drive, battery and charger. Consider it for long corridors or open commercial floors.

Reference
JVC56BTN
Brand
Johnny Vac
Category
Auto-scrubbers
Model information
56 cm / 22 in
Interactive photo1.0×
Johnny Vac · Traction-drive auto-scrubber

Product photograph. Zoom in for a closer look.

The product in detail

The JVC56BTN is a traction-drive walk-behind scrubber with a 22 in scrubbing width and two listed 50 L tanks. Traction is worth considering for long routes and open commercial areas. Brushes detach without tools and the U-shaped squeegee uses blades with multiple usable edges according to the manufacturer procedure.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Traction-drive auto-scrubber · Listed specifications
SpecificationListed value or configuration
Voltage24V
Motor400 W
Solution tank13 gal (50L)
Recovery tank13 gal (50L)
Average runtime3h.
Charging time6h.
Brush motor550 W
Cleaning width22" (559 mm)
Squeegee width34" (864 mm)
Dimensions51" x 40" x 51" (129.54 cm x 101.6 cm x 129.54 cm)
Weight330 lb (150 kg)

Surfaces and compatibility

For hard floors that permit machine scrubbing and water recovery. Identify the covering, finish, joints and level changes before choosing a brush or pad.

The 864 mm squeegee is wider than the 559 mm scrubbing path: measure your doors. Listed runtime of around 3 h and charging of around 6 h depend on battery and conditions.

Preparation and use

  1. Remove large loose debris and clear the route. Mark the work area.
  2. Inspect brushes, squeegee blades, filters, tanks and power supply.
  3. Fit approved consumables and dose a cleaner compatible with floor and machine.
  4. Test suitable settings. Monitor scrubbing and water recovery, particularly when turning.
  5. Empty the recovery tank before it overfills and inspect results after drying.

Care and storage

Rinse tanks and filters as instructed. Clear debris from blades and brushes and check wear. For battery models, follow the specified charger, ventilation and charging cycle. Inspect and store cords on mains models.

Limits and things to check

Cleaning width is not always overall width: measure the squeegee, turns and doorways too. Actual output includes filling, emptying, obstacles and travel. Water streaks call first for checking blades, hose and tank.

Equipment, accessories and options

Supplier-listed equipment: a 22 in brush, pad driver, two 12 V 105 Ah batteries, smart charger, key and 34 in squeegee. Confirm the package components and consumables.

Practical questions

How do I check this reference suits my floor?

Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.

Are all accessories and consumables included?

Supplier-listed equipment: a 22 in brush, pad driver, two 12 V 105 Ah batteries, smart charger, key and 34 in squeegee. Confirm the package components and consumables.

What information is still needed before purchasing?

Confirm overall dimensions as supplied, batteries, charger and separate battery warranty terms.

Why might results differ from the listed output?

Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.