Kärcher · Hard-floor cleaners
Neutral Floor Cleaner
Reference 8.698-102.0
For routine auto-scrubber cleaning of finished hard floors, polished stone or polished concrete where the flooring permits it.
- Reference
- 8.698-102.0
- Brand
- Kärcher
- Category
- Hard-floor cleaners
- Model information
- 4 × 1 gal
Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Zoom in for a closer look.
The product in detail
Kärcher Neutral Floor Cleaner is intended for daily auto-scrubber care of compatible finished floors, polished stone and polished concrete. The 2025 Canadian catalogue describes a no-rinse, phosphate-free formula without added fragrance. It also lists ingredients intended to limit scale and contaminants in the machine.
Lifts everyday traffic soil. Removing the layer of grime can reveal the finish’s original appearance.
Listed specifications
Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.
| Specification | Listed value or configuration |
|---|---|
| Catalogue packaging | 4 × 1 gal |
| 2025 catalogue pH | 7.9 |
| 2025 catalogue dilution | 1:128 |
| Fragrance | No added fragrance |
Surfaces and compatibility
For routine care of hard flooring whose covering and finish permit this cleaner. Identify neighbouring materials too: wood trim, natural stone and grout may require a different method.
Check formula compatibility with your machine, including foam requirements. Confirm how the 1:128 ratio is defined on the current label before mixing.
Preparation and use
Check the finish and machine compatibility. Dose the solution tank as directed and pick up the water with the squeegee.
- Vacuum or sweep grit and loose debris so the mop does not drag them across the floor.
- Read the label on the supplied reference. Use only the stated dilution; ready-to-use products and concentrates require different preparation.
- Test an inconspicuous area and allow it to dry before checking colour, sheen and texture.
- Work in small areas with a clean microfibre pad or approved equipment. Recover dirty water and rinse as instructed.
- Allow the floor to dry before reopening the area. If haze appears, check dosing and pad cleanliness.
Follow the supplied reference’s label and SDS, plus flooring and machine instructions. Do not mix products. The method guidance below complements manuals and does not set a dilution or contact time missing from them.
Care and storage
Launder microfibre pads according to their instructions and keep a clean spare. Store the product in its labelled, closed container under the label conditions. Dirty solution or a saturated pad can redistribute soil.
Limits and things to check
A maintenance cleaner does not replace a stripper, finish or disinfectant. pH and a “neutral” description alone do not establish compatibility with every material. Do not mix in other products.
Equipment, accessories and options
Compatible auto-scrubber, brush or pad suited to the finish and measuring equipment.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
Compatible auto-scrubber, brush or pad suited to the finish and measuring equipment.
What information is still needed before purchasing?
Confirm current label and SDS, excluded surfaces and actual coverage at the required dose.
In the same selection
Kärcher
KD-580 · Shop Floor Cleaner
Degreaser for oily soils on compatible workshop concrete. The concentrate is corrosive. Read the safety data sheet and label before use.
Explore this product ↗
Kärcher
KD-590 · Warehouse Floor Cleaner
Alkaline concentrate for routine cleaning of finished or unfinished warehouse concrete. Check the finish, the auto-scrubber instructions and the product safety data sheet.
Explore this product ↗