Galaxy 2000SX-HR carpet extractor

The product in detail

The EDIC Galaxy 2000SX-HR is a portable extractor with two two-stage vacuum motors and separate 12 and 11 gal tanks. Front casters, large rear wheels and a detachable cord help relocate the work station. ED2000SX is listed as the machine only: plan the tools and hoses you need.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Surfaces and compatibility

For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.

Confirm pressure and configuration against the supplied model’s nameplate and manual. Include the hoses and tools needed for your application in your request.

Preparation and use

1. Dry vacuum, identify stains and clear the area. Test colourfastness.
2. Inspect the cord, seals, hoses, filters and tank levels.
3. Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
4. Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
5. Monitor tank level and foam during operation. Allow complete drying before returning the area to use.

Care and storage

After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.

Limits and things to check

Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.

Equipment, accessories and options

Do not assume the wand, hoses or upholstery tool are included. The compatible Galaxy heater is optional and sold separately.

Practical questions