Henry PPR 240

The product in detail

The Henry PPR 240 is a commercial dry canister vacuum with a polypropylene body and manual cord rewind. Reference 900766 is listed with the AST2 kit. Its ergonomic adjustable wand and tapered hose support daily position and surface changes with a head suited to carpet or hard flooring.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Surfaces and compatibility

For ordinary dry dust and debris with a head suited to hard floors or carpet. On delicate floors, check wheel and bristle cleanliness. On carpet, verify whether a rotating brush is permitted.

Request filtration documentation for this reference if your application requires a specific class. Listed percentages vary and do not establish HEPA certification.

Preparation and use

1. Check the bag, filters, hose and power connection or battery before starting.
2. Choose the correct head and adjust brush and height if available.
3. On backpack models, fit the harness before working and plan the cord route.
4. Vacuum in regular strips, then use the appropriate attachment along edges.
5. Stop if airflow drops or unusual noise develops; disconnect power before clearing obstructions.

Care and storage

Replace the bag before it becomes overfilled and follow each filter’s instructions: some are replaced, others cleaned. Do not wash filters without approval. Remove hair from brushes and store the hose without sharp bends.

Limits and things to check

A HEPA filter does not establish approval for hazardous dust, combustible dust or liquids. Nominal bag volume does not give equal usable capacity for all debris. Check replacement bag references and costs before purchase.

Equipment, accessories and options

The page specifies the standard AST2 kit. NVM-1CH bags, reference 604015, and other kits are shown among accessories: confirm supplied parts and quantities.

Practical questions