NaceCare · Carpet extraction
AV 4X
Reference 8025160
Spray extractor for small carpeted areas such as lobbies and corridors. Its two 4 US gal tanks separate for easier transport. Check that the carpet permits wet extraction.
- Reference
- 8025160
- Brand
- NaceCare
- Category
- Carpet extraction
- Model information
- 4 US gal · 60 psi
Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Zoom in for a closer look.
The product in detail
The NaceCare AV 4X is a compact extractor with an adjustable handle and handle-mounted solution control. Two 4 US gal tanks separate for transport and maintenance. A 60 psi pump feeds the 11 in head; the manufacturer describes a quick-release jet and rotomoulded polyethylene construction.
Listed specifications
Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.
| Specification | Listed value or configuration |
|---|---|
| Maximum airflow | 106 cfm |
| Capacity | 4.0 US gal |
| Cleaning Width | 11 " |
| Power cord | 33 ' |
| Pump Power | 70 W |
| Pump Pressure | 60 psi |
| Recovery Tank | 4 US gal |
| Vacuum Motor | 1000 W |
| Maximum water lift | 100 " |
| Weight | 29 lbs |
Surfaces and compatibility
For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.
The 4 US gal capacity is listed for both solution and recovery. The listed 29 lb weight differs from water-loaded weight. Plan lifting and access to emptying facilities.
Preparation and use
- Dry vacuum, identify stains and clear the area. Test colourfastness.
- Inspect the cord, seals, hoses, filters and tank levels.
- Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
- Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
- Monitor tank level and foam during operation. Allow complete drying before returning the area to use.
Care and storage
After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.
Limits and things to check
Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.
Equipment, accessories and options
The page mentions a squeegee attachment on the shoe for certain hard floors. Verify inclusion and flooring compatibility before this use.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
The page mentions a squeegee attachment on the shoe for certain hard floors. Verify inclusion and flooring compatibility before this use.
What information is still needed before purchasing?
Confirm any brush action, supplied attachments, power requirements and applicable warranty.
Why might results differ from the listed output?
Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.