Nilfisk · Industrial vacuums
S3 HEPA 13 GAL SS
Reference 4010300282
Single-phase stainless steel industrial vacuum with three individually controlled motors, a filter status indicator and an included HEPA filter. Confirm this model’s electrical requirements before selecting it.
- Reference
- 4010300282
- Brand
- Nilfisk
- Category
- Industrial vacuums
- Model information
- 13 US gal · 120 V · 2,400 W
Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Zoom in for a closer look.
The product in detail
The Nilfisk S3 HEPA 13 GAL SS is a single-phase stainless steel industrial vacuum with three individually controlled motors. Its electronic panel provides filter-status information. Selection depends on the material and the complete approved filtration, hose and accessory system.
Listed specifications
Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.
| Specification | Listed value or configuration |
|---|---|
| Displayed voltage | 120 V / 60 Hz |
| Displayed power | 2.4 kW |
| Displayed tank | 13 gal / 50 L |
| Motors | 3 |
| Displayed noise at 1 m | 71 dB(A) |
| Displayed water lift | 71.5 in |
| Displayed cord | 30 ft |
| Displayed weight | 150 lb |
Surfaces and compatibility
For dry debris or liquids only in applications approved for this variant. Identify the material and required filters, bags and tools before changing modes.
Check power and current on the nameplate to determine the required circuit. Have the intended liquid approved for this variant before use.
Preparation and use
- Check the material against the manual’s permitted applications and limits.
- Fit the filter, any required bag and the tool specified for the chosen mode.
- Inspect the float or level system, hose and lid seal.
- Monitor filling and stop according to the machine procedure.
- Dispose of contents using the appropriate route for the liquid or dust, then prepare for the next use.
Care and storage
Empty and clean the tank, inspect the filter and dry components as instructed before dry pickup. Automatic filter cleaning does not replace inspection or replacement when worn.
Limits and things to check
A wet/dry tank does not permit every liquid, fine dust or combustible material. Dust classes, certifications and antistatic systems apply to the complete configuration. Have specialized applications verified.
Equipment, accessories and options
Request the HEPA filter, main filter, hose and tools specific to 4010300282. Specify the exact S3 variant in your request.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
Request the HEPA filter, main filter, hose and tools specific to 4010300282. Specify the exact S3 variant in your request.
What information is still needed before purchasing?
Verify required current, permitted material, complete filtration and attachments.
Why might results differ from the listed output?
Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.
