BR 40/10 C Adv · Dual-roller auto-scrubber

The product in detail

The BR 40/10 C Adv is a corded twin-roller scrubber with 400 mm scrubbing and vacuum widths. Two 10 L tanks separate solution and recovery. Variable contact pressure and roller selection adapt the action to permitted surfaces, including certain textured tiles.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Surfaces and compatibility

For hard floors that permit machine scrubbing and water recovery. Identify the covering, finish, joints and level changes before choosing a brush or pad.

The 120 V / 60 Hz mains supply avoids charging but requires cord management. Listed theoretical and practical outputs differ; obstacles and stops add time.

Preparation and use

1. Remove large loose debris and clear the route. Mark the work area.
2. Inspect brushes, squeegee blades, filters, tanks and power supply.
3. Fit approved consumables and dose a cleaner compatible with floor and machine.
4. Test suitable settings. Monitor scrubbing and water recovery, particularly when turning.
5. Empty the recovery tank before it overfills and inspect results after drying.

Care and storage

Rinse tanks and filters as instructed. Clear debris from blades and brushes and check wear. For battery models, follow the specified charger, ventilation and charging cycle. Inspect and store cords on mains models.

Limits and things to check

Cleaning width is not always overall width: measure the squeegee, turns and doorways too. Actual output includes filling, emptying, obstacles and travel. Water streaks call first for checking blades, hose and tank.

Equipment, accessories and options

Supplier-listed equipment: two rollers, transport wheels and suction tools. Check supplied rollers and options for porcelain tile or grout.

Practical questions