Floor care equipment in Joliette
(450) 752-2617
‹ HomePuzzi 30/4 · Large-capacity spray extractor

Kärcher · Carpet and rug equipment

Puzzi 30/4 · Large-capacity spray extractor

Reference 1.101-126.0

For larger areas of compatible carpet, with a 30 L clean-water tank and 35 cm floor nozzle.

Reference
1.101-126.0
Brand
Kärcher
Category
Carpet and rug equipment
Model information
30 L
Interactive photo1.0×
Kärcher · Puzzi 30/4 · Large-capacity spray extractor

Product photograph. Zoom in for a closer look.

The product in detail

The Puzzi 30/4 extends capacity beyond a small extractor with 30 L clean water, a 350 mm floor head and 4 m hose. Wastewater collects in a removable 15 L recovery tank. Large wheels and an EASY Operation selector support movement and setup on large compatible textile areas.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Puzzi 30/4 · Large-capacity spray extractor · Listed specifications
SpecificationListed value or configuration
Maximum area output (m²/h)60 - 75
Airflow (l/s)74
Vacuum (mbar/kPa)254 / 25.4
Spray flow (l/min)3
Spray pressure (bar)4
Clean/recovery tanks (l)30 / 15
Turbine power (W)1200
Pump power (W)70
Voltage (V)110 - 127
Frequency ( Hz )60
Weight without accessories (kg)26
Dimensions (L × W × H) (mm)590 x 470 x 783

Surfaces and compatibility

For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.

Tank volumes differ: the recovery tank may need emptying before the clean tank is exhausted. The description lists 66 dB(A); sound comparisons require matching measurement conditions.

Preparation and use

  1. Dry vacuum, identify stains and clear the area. Test colourfastness.
  2. Inspect the cord, seals, hoses, filters and tank levels.
  3. Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
  4. Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
  5. Monitor tank level and foam during operation. Allow complete drying before returning the area to use.

Care and storage

After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.

Limits and things to check

Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.

Equipment, accessories and options

Supplier-listed equipment: a 4 m hose, 350 mm nozzle, trigger and 700 mm stainless wand. A socket supports a compatible PW 30/1 head; ask whether it is included in your quote.

Practical questions

How do I check this reference suits my floor?

Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.

Are all accessories and consumables included?

Supplier-listed equipment: a 4 m hose, 350 mm nozzle, trigger and 700 mm stainless wand. A socket supports a compatible PW 30/1 head; ask whether it is included in your quote.

What information is still needed before purchasing?

Confirm any PW head, electrical circuit requirements, consumables and warranty.

Why might results differ from the listed output?

Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.