Floor care equipment in Joliette
(450) 752-2617
‹ HomeAdmiral XL · Large-area carpet extractor

Kärcher · Carpet and rug equipment

Admiral XL · Large-area carpet extractor

Reference 1.008-161.0

Extractor designed for large carpeted areas. A visual indicator helps the operator maintain the recommended extraction speed.

Reference
1.008-161.0
Brand
Kärcher
Category
Carpet and rug equipment
Interactive photo1.0×
Kärcher · Admiral XL · Large-area carpet extractor

Product photograph. Zoom in for a closer look.

The product in detail

The Admiral XL BRC 45/45 C is a self-contained extractor for large carpeted areas. The 2025 Canadian catalogue pairs an 18 in path with 12 and 11 gal tanks. A low-moisture Eco setting supports interim cleaning and SmartSpeed guides consistent operation. The brush and suction shoe are described as removable without tools.

Listed specifications

Supplier specifications. Performance varies with configuration and conditions of use. Follow the supplied product’s manual and label.

Admiral XL · Large-area carpet extractor · Listed specifications
SpecificationListed value or configuration
Width18 in
Solution / recovery12 / 11 gal
Catalogue pressure90 psi
Catalogue water lift120 in
Cord50 ft
Listed operating sound68 dB(A)
Catalogue weight126 lb
Catalogue dimensions L × W × H33 × 22 × 45 in
Canadian page power supply120 V / 60 Hz

Surfaces and compatibility

For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.

The catalogue distinguishes deep extraction from low-moisture maintenance. Match chemical and procedure to the mode rather than retaining identical settings for every task.

Preparation and use

  1. Dry vacuum, identify stains and clear the area. Test colourfastness.
  2. Inspect the cord, seals, hoses, filters and tank levels.
  3. Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
  4. Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
  5. Monitor tank level and foam during operation. Allow complete drying before returning the area to use.

Care and storage

After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.

Limits and things to check

Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.

Equipment, accessories and options

The catalogue lists a yellow 50 ft cord. Confirm brush, shoe, off-aisle tools and required chemicals.

Practical questions

How do I check this reference suits my floor?

Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.

Are all accessories and consumables included?

The catalogue lists a yellow 50 ft cord. Confirm brush, shoe, off-aisle tools and required chemicals.

What information is still needed before purchasing?

Confirm current configuration, mode-specific flow and output, tools and warranty.

Why might results differ from the listed output?

Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.